This perfectly smooth PET (polyethylene terephthalate) blockout banner is totally opaque so no light can show through it.
Ultra Smooth Indoor Banner
This perfectly smooth PET (polyethylene terephthalate) blockout banner is totally opaque so no light can show through it. This also prevents the printing on side from showing through to the other, so it can be used for double sided printing. It's PVC-free and recyclable, so it's more eco-friendly than vinyl, and it offers excellent print quality and color reproduction. It's fire retardant and available in widths up to 63", or up to 80" by special order.
It’s fade resistant for up to 20 years indoors.
It has a perfectly smooth surface and is completely opaque. It's fire retardant for use in all indoor locations. It hangs very flat.
It doesn't have great tear strength because it has no fabric scrim, so it's only good for indoor use.
It's great for window graphics, either stuck to a window or hanging, because it's totally opaque. Adhesive options are available to make this into a window graphic that mounts face first, or with the back adhering to the window. It's also great for banner stands, although we have similar PVC materials that are less expensive. It would also be ideal for custom window shades.
If you are ordering your banner with grommets, the best way to hang it is to put some tension on the grommets so the banner is pulled tight and hangs flat. If you are using banner hanging hardware to hang the banner without grommets, follow the instructions that came with your hardware. We sell banner hanging systems that are inexpensive, make for a great looking hanging display, and don't require any special finishing on the banner. Check out the page for Poster & Banner Hangers to learn more about the different banner hanging products we offer.
If your banner is being installed in a display, see the installation instructions for the model you are using. Be sure to choose the correct finishing options to match the type of banner display you have. For example, if you are using an X-banner stand, you will need grommets in the corners of the banner. If you are unsure, tell us in the Special Instructions what display you have so we can make sure the finishing is correct for that specific purpose.